Laticrete DuPont™ StoneTech® Professional Paver Sealer & Enhancer, 1 Gallon
Enhance the beauty of concrete pavers and masonry with a water-based sealer
that delivers long-lasting protection
against water-based stains.
Standard protection against most stains
Interior and exterior use
For Use On:
Concrete pavers, masonry, brick, concrete, mortar. Indoor and outdoor surfaces.Directions For Use:
Read product label prior to use. Test in a small inconspicuous area with a 24-hour cure time to determine ease of application and desired results.
- Shake well before using.
- Apply product evenly using a paint pad, roller or brush. Avoid applying product on unintended surfaces. Do not apply product with a sprayer.
- Allow product to penetrate surface for 15–30 minutes. Spread excess over entire area for even penetration. Following penetration time, completely wipe surface clean with a clean dry towel.
- A second coat is recommended for highly porous concrete pavers. Apply second coat 1 hour after first coat following directions in steps 2–3.
- A full cure is achieved after 24–72 hours; foot traffic may begin in 6–8 hours. If needed sooner, cover the floor with red rosin paper to protect it until the recommended time periods have passed.
- Clean tools used during application with water.
Allow new grout installations to cure for at least 72 hours prior to application.
Be sure surface is clean, thoroughly dry and free of sealers, waxes and coatings prior to application.
Ensure work area is well-ventilated during application and until surface is dry.Coverage:
Gallon: 125-275 sq ft depending on porosity of stone surface.
2-5 yearsSafety Data: DuPont™ StoneTech® Professional Paver Sealer & Enhancer MSDSAdditional Information:
Clean surface as needed with Revitalizer® Cleaner & Protector or Stone & Tile Cleaner.