Armstrong S-202 Static Dissipative Tile Adhesive - 1 Gal

Armstrong S-202 Static Dissipative Tile Adhesive - 1 GalZoom
Mfr. Part No:FP00202108
Total Price:

Product Description

Armstrong S-202 Static Dissipative Tile Adhesive, 1-Gallon, with excellent bond strength for installing Armstrong SDT floors in commercial facilities. Water based rubber resin adhesive. Moisture and alkali resistant. Long working time. Apply S202 SDT Adhesive with a trowel on all grade levels of concrete and suspended wood, ceramic, terrazzo, polymeric poured and certain metal subfloors when properly prepared with Armstrong S-194 Patch, Underlayment & Embossing Leveler, and on radiant heated subfloors where the surface temperature does not exceed 85°F (29°C). Keep product from freezing. S-202 is NOT freeze-thaw stable. Stir well before use.
  • Coverage: approx 150 sf per gallon
  • Trowel: See S-202 Product Data Sheet for trowel notch specifications.
  • Working Time: Up to 6-hours, will vary based on site conditions.
  • Open Time: Until dry to touch, 60+ minutes
  • Moisture Limits: 75%RH; 3lbs/1000sf CACL MVER
  • Alkalinity Range: 5-9 PH
  • Clean Up: Use mineral spirits to wet or dry clean tools.
  • VOC Content: Low, less than 50 g/L
  • Shelf Life: 1-year unopened
  • Safety Data: Armstrong S202 Static Dissipative Tile Adhesive SDS
  • Container Sizes: 1-Gallon, 4-Gallon