Fast-acting, synthetic cleaner specifically formulated to clean metal cross-linked finishes. Hillyard Top Clean, in a 1-gallon size, does an excellent job of removing soil and dirt to leave a high-gloss appearance without dulling the finish on resilient floors finished with metal cross-linked floor finish. No foam build-up with Top Clean and neutral formula is safe for use on most flooring types.
Top Clean has a neutral pH formula so it's safe to attack dirt without harming your floor or your floor finish. Hillyard Top Clean comes in a concentrated formula and dilutes for use in a 1:128 to 1:32 dilution ratio depending on the amount of dirt build up that needs cleaning. Hillyard Top Clean Safety Data SheetHillyard Top Clean Product Information Sheet
Basic cleaning method directions and dilution amounts for Top Clean by Hillyard:
FLOORS: FOR DAILY DAMP MOPPING use 1 oz. - 2 oz. of Top Clean to each gallon of water.
FOR MACHINE SCRUBBING use 1 oz. - 3 oz. per gallon of water.
FOR AUTOMATIC SCRUBBER use 1 oz. - 2 oz. of Top Clean to each gallon of water (depending on amount of surface
soil). Use light scrub pad only. Remove the soiled cleaning solution. It is not necessary to rinse after normal cleaning.
When preparing a surface to receive paint, finish, etc., rinse with clean water after scrubbing.
- Neutral pH wont harm floor or floor finish.
- Defoaming agents minimize foam build-up.
- Meets Green Seal™ Standard GS-37, is NSF Registered and is certified Kosher™.