4-Gallon Roll Strong Adhesive S-315 for installing commercial and residential LVT floors. Use for approved substrates with RH level 95&prcnt; or less. Roll-on adhesive with a 3/8-inch nap roller for quicker install. Moisture and alkali resistant, nonflammable, ammonia free, zero VOCs, low-odor. Floors installed with S310 Adhesive are ready for normal traffic and rolling loads immediately after installation. Use on all grade levels of concrete, existing resilient floors, ceramic, terrazzo, marble, steel, stainless steel, aluminum, polymeric poured floors and suspended wood.
S-315 Roll Strong Adhesive has a strong, early grab and typically requires just one coat. For absorbent or dirty subfloors, 2 coats will be needed. Application is with a 3/8 inch nap roller. Coverage is 350-400sf per gallon. Allow 15+ minutes of open time, until dry to touch. Working time is up to 4 hours but may vary based on site conditions. Normal foot and rolling traffic may start immediately following luxury vinyl floor installation. S315 is suitable for heavy rolling loads after complete adhesive cure.