Commercial Metal Cross Linked GLOSS acrylic floor polish for luxury vinyl and other resilient floors, XL North XL18 Gloss Floor Finish, 1-gallon,
is a cross metal interlinked pure acrylic finish, low 18% solids, provides very good floor protection and can be high speed burnished to maintain shine. Infused with Intersept®, an EPA reg anti-microbial. Non-slip fast drying premium floor finish. Scuff and stain resistant.Use on
VCT, LVT, linoleum, terrazzo, rubber, asbestos tile, asphalt tile, concrete and other resilient floors. Non-resilient floors such as marble may require testing for adhesion.
is 2000-3000 sf per gallon single coat.
Safety Data: XL NORTH XL18 Gloss Floor Finish MSDS
Technical Data: XL NORTH XL18 Gloss Floor Finish Tech Data SheetDIRECTIONS:
Seal off areas to be stripped or finished. Prior to application, floors should be completely stripped of old finish and neutralized. The surface should be completely dry before applying first coat and all subsequent coats. Do not use an air mover or fan directly on the flooring to dry finish, always use indirectly.
Using a microfiber pad or clean mop on unsealed floors, apply 4-5 coats. Apply additional coats until the desired gloss is obtained. Allow a minimum of 30 minutes drying time between coats. Temperature, humidity and ventilation may affect drying time. Burnishing is not required but is acceptable if higher shine is required. Allow the finish to cure for 24 hours before burnishing or putting any heavy furniture on the floor.
Seal off area and apply 1-2 thin, even coats of finish using a microfiber pad or clean mop.