Prevail METROFLOR Matte Finish, Gallon

Prevail METROFLOR Matte Finish, GallonZoom
Mfr. Part No:PR-MAFN-GL
Brand:Prevail Metroflor
Quantity Pricing
Qty.Price Ea.
4 +$62.19
No Longer Available

Product Description

Protect and refresh your Metroflor luxury vinyl tile (LVT) and plank floors with Prevail Metroflor Matte Finish (PR-MAFN-GL). This low-gloss Metroflor floor finish provides a tough, long-lasting finish with exceptional stain protection, especially on vinyl floors with urethane coating and ceramic bead. The attractive matte finish helps reduce visibility of scuffs and scratches and goes on easily with a fast dry time. It is recommended for use on non-ceramic finished luxury resilient tile and plank. This product is not recommended for exterior or interior floors that are subject to standing water or wet conditions.

Coverage: Approximately 1600 square feet per gallon.

Directions For Use: 

Read Product label & Flooring Maintenance Instructions prior to use and test product in an inconspicuous area prior to full application.

New Installations: Floors installed with wet set adhesives must be allowed to cure for 48 hours before they can be sealed.

  1. Preparation: Clean floor thoroughly to remove all surface soil and stains in accordance with Metroflor 1-Step Neutral Cleaner directions. Rinse well with clean water and allow floor to air dry.
  2. Application: Apply the finish in light coats using a clean sponge mop, wax applicator or a damp, clean cloth. Put a small amount of finish in a shallow pan, dip mop and spread a thin, even coat. Do not leave any puddles. Allow to fully dry (tack free) for at least 30 minutes before applying second coat. Apply 3-5 coats for low-traffic areas. Apply an additional 1-2 coats for high-traffic areas.

Recoat: Apply 1-2 thin coats to improve the appearance of previously finished floors. Let dry at least 30 minutes between coats. Floors must be cleaned with neutral cleaner and completely dry prior to applying finish. Finish may start to build up in low traffic areas if too many coats are present. When this occurs, use Metroflor Stripper to strip floor and start over following application directions for newly installed floors.

Maintenance: Clean floor as needed using Metroflor Neutral Cleaner.

Safety Information: Prevail Matte Finish SDS

See General Maintenance Instructions for Ceramic Bead Finish or General Maintenance Instructions for Non-Ceramic Bead Finish for Initial Care & Preventive Maintenance Directions.