Spartan Green Solutions Floor Finish Remover 350504, 1 Gallon (ORMD)

Low-odor floor finish remover & wax emulsifier Spartan Green Solutions® Floor Finish Remover 3505, 1 Gallon (ORMD).

• Specifically formulated to strip Green Solutions® Floor Seal & Finish and other cross-linked acrylic finishes
• Fast-acting
• Fragrance-free
• Low VOCs, No Butyl
• Meets Green Seal GS-40 Standard for Industrial and Institutional Floorcare Products
• Ideal for School & Healthcare facilities

This is an ORMD Item that requires special handling with limited shipping methods.

For Use On: Resilient floors finished with Green Solutions® Floor Seal & Finish or similar cross-linked acrylic finish.

Directions For Use:

1. Depending on build-up, dilute at 1:3 to 1:20 (6 oz /gal or 43 oz /gal) with water. For automatic scrubbers, dilute up to 1:10 (12 oz /gal) with water.
2. Liberally apply solution with mop to small section (100 sq ft) of floor. Be sure to completely cover floor to baseboards.
3. After 3 to 5 minutes, agitate the wet section with a mop or machine scrub. Pick up solution using a mop, wet vac or automatic scrubber.
4. Rinse thoroughly with clear water to remove residue or squeegee tracks as necessary.

NOTE: Cold water is recommended for dilution.

Safety Data: Spartan Green Solutions® Floor Finish Remover SDS

Additional Information: Spartan Green Solutions® Floor Finish Remover Product Data

Specifically recommended for use on the following floor brands:
(Check compatibility with specific flooring material prior to use.):
Johnsonite (Tarkett Commercial Flooring)
Roppe Rubber Flooring