SunSwept® Floor Sealer & Finish 406404, 1 Gallon
Acrylic co-polymer based floor sealant and finish for maintaining high gloss floor finishes. Will not dull, haze, discolor or streak existing floor finish. Use with an automatic scrubber to clean and polish in one easy application. Reduce the frequency of the remove and recoat finish process. Static coefficient of friction meets or exceeds 0.5 as determined by ASTM method D 2047. Pine fragrance.For Use On:
Resilient type floorings: asphalt, rubber, vinyl, terrazzo, ceramic tile, quarry tile and all surfaces unharmed by water. Compatible with all Spartan floor finishes.Directions For Use:
Prior to use, read product label and MSDS for safety precautions and proper application.
Automatic Scrubber: Sweep or dust mop floor. Fill the solution tank with water. To restore gloss and clean floor, add one part SunSwept to thirty two parts water (4 oz./gal water). For higher performance or maximum economy, experiment with dilutions from 1:10 to 1:40 and burnish or buff as necessary.
Note: Due to variances of soil conditions, it is recommended that users experiment with different types of pads or brushes and the amount of application pressure applied to the floor surface.
Routine Maintenance: Use Spartan SunSwept daily, or at least once a week, to insure continuous optimal floor appearance. Always dust mop or sweep floors before applying SunSwept.Note: Not intended for use as a spraybuff or floor finish. For best performance, reliability and compatibility use with Spartan floor finishes.Coverage:
Diluted 1:10 to 1:30 (4 to 13 oz/gallon)
5000 – 10,000 sq ft/gallon depending on porosity of floorSafety Data: Spartan SunSwept MSDSAdditional Information: Spartan SunSwept Product DataSpecifically recommended for use on the following floor brands:
(Check compatibility with specific flooring material prior to use.)
Johnsonite (Tarkett Commercial Flooring)