Spartan Green Solutions® Floor Seal & Finish 3504, 1 Gallon
Spartan Green Solutions Floor Seal & Finish (Spartan 350404) is an acrylic, co-polymer, high-solids, high-gloss, non-yellowing rubber, VCT and vinyl
sealer that offers a fast recoat time and superior leveling capability. This Spartan sealer and finish is Green Seal Certified and contains no heavy metals, formaldehyde, volatile organic compounds (VOCs) or glycol ether and only trace amounts of zinc. It will not cause problems with sewage effluence. This product is designed for use on commercial resilient floors, including vinyl, VCT and rubber
. It is recommended for use on Roppe rubber flooring
Directions for Use:
Before using, read full product label and SDS sheet.
Completely strip all old floor finish with Green Solutions Floor Finish Remover. Remove stripping solution and follow with 2 - 3 clear-water rinses. Allow to dry. Apply Green Solutions Floor Seal & Finish in a uniform, thin coat. Let dry thoroughly (30 minutes under normal conditions; 45 minutes or longer where high humidity exists. Continue to apply subsequent coats in the same manner. Three to five coats are recommended.
Dust mop or sweep floor. Water-based dust mop/dust cloth treatment is recommended. Damp mop with Spartan Green Solutions All Purpose Cleaner.
TO REPAIR TRAFFIC AREAS between finish applications:
Conventional Machines: Spray-buff using Green Solutions Floor Seal & Finish diluted 1:4. For use as a mop-on restorer use Green Solutions Floor Seal & Finish diluted 1:2.
High Speed Machines: Mix 1 gallon of Green Solutions Floor Seal & Finish with 2 gallons of water (1:2). Saturate a clean mop and wring thoroughly. Apply thin coat of diluted Green Solutions Floor Seal & Finish and let dry. Dry buff or burnish using a non-aggressive polishing pad.
Traffic lanes may be recoated as necessary.
For heavily soiled areas, machine scrub using Green Solutions All Purpose Cleaner.
Cold water is recommended for dilution.
Do not allow this product to freeze.
2,000 to 3,000 square feet per gallon depending on application method and porosity of floor.
Gloss (Gardner): 1 coat: 80-85; 2 coats: 85-90
Safety Data: Spartan Green Solutions Floor Seal & Finish SDS
Green Solutions Floor Seal & Finish Information Sheet
Green Solutions Floor Seal & Finish Green Seal Certificate
Specifically recommended for use on the following floor brands:
(Check compatibility with specific flooring material prior to use.):
Johnsonite (Tarkett Commercial Flooring)
Roppe Rubber Flooring