Professional grade penetrating sealer increases slip resistance on Porcelain, Ceramic Tile and Natural Stone. Once cured, Miracle 511 Anti-Slip Formula, 1 Quart
is not visible and will not alter the look of the surface to which it is applied. For interior and exterior applications. Provides added resistance to moisture and stains. Safe for use in food handling areas.
Apply one of Miracle's Impregnator/Penetrating Sealers before 511 Anti-Slip for maximum stain protection.For Use On:
Polished Granite, Polished Marble, Limestone, Ceramic Tile, Grout, Travertine, Natural Stone, Concrete, Porcelain tile, Slate. Use for indoor and outdoor applications.Directions For Use:
- Apply evenly to surface until damp using a Miracle Sealants Applicator, clean white towel, micro fiber towel, paint roller or paint type brush.
- Leave on the surface for 3-5 minutes for maximum penetration before removing excess product with a clean white towel, micro fiber towel or carpet bonnet before it dries. Excess product residue that dries on the surface can be removed by re-applying 511 Anti-Slip, wetting the surface and immediately wiping off excess while wet.
- A 2nd application is necessary. Wait at least 2 - 4 hours before applying the 2nd coat.
- Allow 24 - 72 hours to fully cure before allowing foot or other traffic on the floor. Drying times may vary depending on ambient conditions including amount of humidity or moisture in the air.
100 – 750 square feet per quart under normal conditions depending on porosity of material to which it is being applied and the application technique.Safety Data:
Miracle 511 AntiSlip Formula MSDS