Diversey Complete Floor Finish, 1 Gallon

  • Diversey Complete Floor Finish, 1 Gallon
  • Click Image(s) to Enlarge
Mfr. Part No:04649

Product Description

For long-lasting gloss and durability, apply Diversey Complete Floor Finish (Diversey 04649), 1-gal, to resilient or most any hard surface floor including luxury vinyl. A sealer may be required for highly polished stone surfaces, glazed ceramic tile, luxury vinyl tile, and some rubber floors. Check with your flooring manufacturer maintenance instructions or test before full use to ensure desired results. Responds well to spray buffing. Per coat coverage for 1-gallon is approximately 1500 sf. Not intended for use on cork, wood, or bamboo flooring.

Diversey Complete Floor Finish Safety Data Sheet
Diversey Complete Floor Finish Information Sheet

Use Instructions:
Block access to areas to be stripped or finished because floors will be slippery until dry. Read bottle label prior to use.
  1. Strip floor using recommended Diversey brand stripper/finish remover according to label directions for initial application.
  2. Apply 2-3 uniform coats of Complete Floor Finish using a clean mop. If higher gloss is desired apply additional coats.
  3. Allow 40-50 minutes drying time between coats and allow floor to fully cure before heavy foot traffic or moving furniture onto freshly polished floor.

  • Before recoating floor with Diversey Complete, deep scrub floor then apply 1-2 coats with a clean mop.
  • To remove, use a recommended Diversey brand stripper according to label directions.
  • Diversey Complete is also available in a 5-gallon size for larger floor finishing projects.