Bona Stone, Tile & Laminate Floor Polish, 32oz, is a specially formulated waterborne urethane maintenance polish for most hard surface floors. It provideds a clear, highly durable, gloss shine to hard surface floors that have become dull, scratched or beginning to show signs of wear.

Adds protective layer, fills in micro-scratches

Evens-out the floor’s appearance

Improves the floor’s shine

Easy to apply for do-it-yourself

Quick drying

Non-toxic, waterborne formula

32 oz. ready to use, recycleable container

For Use on Sealed Hard Surface Floors Including: Laminate(such as Pergo), Vinyl, No-Wax Linoleum, Terrazzo, Unglazed Tile (Ceramic, Mexican Saltilo, Quarry), Stone, and Porous Marble.

Directions for Use:
1. Remove furniture, rugs, etc. Vacuum, sweep or dust mop, then thoroughly clean with Bona Stone, Tile & Laminate Floor Cleaner and the blue Microfiber Cleaning Pad on your Bona Mop. Allow the floor to air dry.
2. Gently rock Polish back and forth to mix. Slightly dampen the cream-colored Microfiber Applicator Pad with water and attach to mop. Squirt product onto the floor and spread. Work in sections small enough to keep the Applicator Pad wet. Smooth with the grain. Continue working in sections until the entire floor is finished. Rinse Applicator Pad with water until free of polish.
3. Allow to dry at least 1 hour before walking on the floor. For a glossier floor, a second coat may be applied after 2 hours. Allow 24 hours before heavy traffic.
Recommended for use every 1 -2 months.

For best results: Always test in an inconspicuous section of the floor before use.

Coverage: 500 square feet per bottle. Do not apply the product too thin or streaking will occur. Coat the entire floor to ensure an even appearance.

Tools needed: Bona Mop (avail w/ kit), Microfiber Cleaning Pad, Microfiber Applicator Pad, Bona® Stone, Tile & Laminate Cleaner & Polish. Mop, pads & Cleaner can be purchased together as a kit or separately.

Important Notes:

Bona Stone, Tile & Laminate Floor Polish cannot be coated with polyurethane or Bona Stone, Tile & Laminate Floor Refresher.

Bona Stone, Tile & Laminate Floor Polish is not a cleaner. Make sure the floor is completely clean and dry before applying this product.

Do not use over any floor that has been oiled or waxed. Wax and oil may prevent this product from adhering.

Always use a clean applicator. Use of contaminated applicator may cause a hazy or streaky appearance.

Never use string mops, cotton mops or sponge mops to apply this product.

Avoid replacement of furniture and floor mats for at least 24 hours.

Results may vary according to the individual application techniques and prior condition of floor.

Safety Data Sheet:Bona Stone, Tile & Laminate Floor Polish MSDS