Armstrong Excelon Floor Polish is NO LONGER AVAILABLE. Recommended replacement:
Armstrong S-480 Commercial Floor Polish ****************************************************************** Armstrong S-403 Excelon Floor Polish is for use on all Armstrong commercial vinyl floor coverings EXCEPT Safeguard, Safeguard Spa, Safeguard Design, Safeguard Hydro and Excelon SDT. It may be used on linoleum, ceramic, slate and terrazzo.

Advantages of using Armstrong S-403 Excelon Floor Polish:

High durability for long-lasting protection.

Metal cross-linked acrylic polish.

18% solids for easy application and excellent leveling.

Dries bright for areas where buffing is not applicable or designed.

Excellent buffing response for spray-buffing repairs or high-speed burnishing programs.

Coverage rate: 1,500 - 2,000 feet/gallon depending on surface characteristics of the floor.

FLOOR PREP - First Coat:

Strip floor using Armstrong Excelon Floor Stripper. Rinse thoroughly. Let floor dry.

FLOOR PREP: - Recoating:

Sweep or vacuum thoroughly. Scrub with Armstron Excelon Floor cleaner. Rinse thoroughly. Let floor dry.

POLISH - Low traffic;

Apply 3-5 coats (do not apply more than 4 coats of polish at a time) Pour polish into a clean bucket (never pour polish directly onto floor). Use a clean finish mop (rayon) or finish applicator. Let dry 30 minutes between coats.

POLISH - High traffic:

Follow instructions for Low Traffic; then High speed burnish or Spray buff or apply 1-2 extra coats.

Safety Data: Armstrong-403 MSDS