Conveniently sized 16 oz Odorcide Fresh Scent is small but handles big bad odors with ease. The handy accu-measure 16-ounce bottle makes measuring concentrated Odorcide a snap. Use diluted Odorcide Fresh Scent to neutralize nasty odors and leave a pleasant fresh scent in the air, in laundry loads, on carpeting, upholstered furniture, in automobiles and more. The uses for Odorcide Fresh Scent are endless and the small size goes a long way, making up to 32 gallons of diluted odor neutralizing solution.
Odorcide works by permanently neutralizing bad odors and replacing them with a mild, pleasant scent through a counteraction, absorption and bonding process. 100% Biodegradable. Non-irritating to skin. Not corrosive to treated articles including upholstery. Water-based formula.
Use in Commercial, Hospitality, Institutional or Residential Applications including general cleaning, eliminating pet odors, removing smells from sporting equipment, bathroom deodorizing and more.Dilution Ratios & Method of Application:
- Carpet - 1 oz per pint (16oz) of water - Soak or Inject
- Hard Surfaces - 1 oz per pint (16oz) of water – Spray
- General Cleaning or Rinse Water – 1 oz per one or two gallons of water.
- Ongoing/ Preventative - ¼ oz per 16oz of water in a spray bottle
- Laundry - ½ oz per standard laundry load; add to laundry detergent or fabric softener
- Pre-Laundry Soak - 1oz per gallon of water - Soak
For carpet odors: If recent, blot or remove surface matter causing the odor as much as possible. Spray or squeeze Odorcide 210 onto area to be cleaned. For deeply embedded odors, saturate area thoroughly. For carpets, stepping on the soaked area will improve penetration. Product must come in contact with the odor source to be effective. Let air dry. If odor remains, not enough product was used. Repeat.
For stains: Rub area thoroughly with a sponge or cloth saturated with Odorcide 210. Blot with clean cloth. Let dry and vacuum.
For Air Deodorizing: After general cleaning, spray area. Allow to air dry. Will not leave residue.
Treating Urine Stains: Noting the surface stain is generally sufficient however, a black light or a probe that detects urine salts can be useful if urine odors are being treated. Use the rule of thumb that urine migrates laterally about 50% beyond the stain area, as well as penetrating deeply, often through backing, padding and into the sub floor. Apply sufficient mix to cover contaminated area and to penetrate as deeply as the odorous material. PRESSURE SPRAY at 40 to 100 PSI, INJECT or POUR on. To assure penetration, use a roller or simply walk the product in. Vacuuming and cleaning can take place immediately after application. If any odor remains, it's because Odorcide has not penetrated to the source of the odor. Fold back the carpet and apply to the underside, padding and flooring.
Penetration to Odor Source: Make certain that the Odorcide comes in physical contact with the most deeply embedded odor source to successfully remove malodors.
- Effectiveness is decreased when using with Chlorine solutions.
- Always spot test for color fastness.
Pair Odorcide Fresh Scent with Vital-Oxide to eliminate odors while the Vital-Oxide eliminates mold and bacteria.
Safety Data Sheet: Odorcide Fresh Scent MSDS