AQUA MIX HEAVY-DUTY TILE & GROUT CLEANER is a concentrated, high-alkaline cleaner and degreaser. Effectively removes grease, soap scum, body oil, mildew stains, and algae from areas that have been neglected or subjected to heavy use. Specially formulated to strip off synthetic and acrylic waxes and floor finishes.

Aqua Mix Low VOC (Volatile Organic Compound Formulas) help provide better indoor and outdoor air quality compared to similar traditional products. 25 grams of VOC’s per liter of material.

USES: Natural stone (such as granite, limestone, slate, and travertine), ceramic, porcelain, quarry, Saltillo, terra cotta, cement pavers, masonry surfaces, linoleum, or resilient flooring.

APPLICATION: DO NOT KNEEL IN THIS PRODUCT. AVOID ALL SKIN CONTACT. 1) Read entire label before using. 2) Put on Rubber Gloves and Eye Protection. 3) Sweep, vacuum, or wipe surface. 4) Mix Heavy-Duty Tile & Grout Cleaner as follows: LIGHT SOIL BUILD-UP: Mix 1 part cleaner to 5 parts water. MODERATE SOIL BUILD-UP: Mix 1 part cleaner to 3 parts water. STRIPPING OR HEAVY SOIL BUILD-UP: Mix 1 part cleaner to 2 parts water. 5) Apply solution to surface with mop or sponge. 6) Allow to dwell 3 to 5 minutes for cleaning, or 5 to 10 minutes when stripping waxes or finishes. 7) Agitate with synthetic mop, scrub brush, or scrub machine. Do not allow solution to dry on surface. 8) Mop up dirty solution. 9) Rinse thoroughly with clean water.

Note: May adversely affect grout joints that have been coated with colorant or grout stain.

COVERAGE: Approximately 150 to 600 sq. ft. (15 m2 to 55 m2) per gallon (3.8 L) depending on dilution.