StoneTech® Semi Gloss Finishing Sealer, Gallon

StoneTech® Semi Gloss Finishing Sealer, Gallon
Item Number: STONE-389062
1+ pieces$89.80 ea.
2 + pieces$80.82 ea.
Regular price:$89.80

DuPont™ StoneTech® Professional Semi Gloss Finishing Sealer, 1 Gallon

  • Two-in-one formula leaves a light sheen and protects against stains.
  • Easy-to-use, water-based formula.
  • Interior use.
  • LEED points qualified product.

  • For Use On: Slate, saltillo, limestone, travertine and concrete floors. Not intended for use on glazed, polished, or non-absorbing surfaces, wood floors & decks, showers, countertops, or near pool areas. Interior use only.

    Directions For Use:
    Read product label prior to use. Always test in a small inconspicuous area to determine appropriate application method, achievement of desired results, and to ensure good adhesion.
    1. Liberally apply 2–4 even coats with a natural bristle brush, roller, or paint pad applicator. Do not apply product with a sprayer or sponge. Avoid puddling of liquid during application. Failure to apply a sufficient amount of sealer to the surface may result in an undesirable finish or degradation of the coating. More coats may be applied if desired.
    2. Allow 30–45 minutes between coats or until surface is dry to the touch.
    3. Surface traffic may begin 12 hours after final application; keep installation dry for a minimum of 12 hours; full cure is achieved in 24–48 hours.
    4. Keep surface clean and dry as finished surfaces may become slippery when wet.
    Ensure work area is well-ventilated during application and until surface is dry.
    Avoid applying in direct sunlight.
    Surface must be thoroughly clean, dry, and free of any sealers or coatings before application.
    Application to a dirty or dusty surface will affect adhesion and appearance.
    High Gloss Finishing Sealer should not be applied to a wet or moist surface.
    Avoid applying onto surfaces not intended for treatment.
    For new installations, sealer can be applied as soon as 48–72 hours after grouting.
    Fresh concrete slabs require a minimum of 28 days to cure before applying the sealer.

    Coverage Gallon: 100-300 sq ft depending on porosity of stone surface.
    Expected Wear: 3-5 years on interior surfaces however touch up on higher traffic areas may be required on a more frequent basis.

    Safety Data: DuPont™ StoneTech® Professional Semi Gloss Finishing Sealer MSDS

    Additional Information: Clean surface as needed with Revitalizer® Cleaner & Protector or Stone & Tile Cleaner.

    UPC #: 669009202046
    Manufacturer Part Number: D12398062
    Brand: Laticrete Stonetech (DuPont)

    Frequently Purchased With:

    Customer Testimonial:

    ecommerce provided by Yahoo! Small Business

    StoneTech® Semi Gloss Finishing Sealer, Gallon