This 1-gallon container of Congoleum Bright 'n Easy Satin-Gloss Floor Polish (Matte) will enhance the beauty and performance of your resilient flooring while simultaneously protecting it against scuffs and scratches. Designed for use on Congoleum resilient sheet, tile and plank floors, Congoleum Bright 'n Easy Floor Polish provides a natural look and feel with a matte finish. This is an ultra-durable satin floor finish that can be used for periodic whole-floor refreshing. It provides a more natural sheen than Congoleum's high-gloss polish and is good for use on stone or wood-look floors where you want to maintain the natural look.
For Use On: Congoleum Resilient Sheet, Tile and Plank Floors.
Coverage: 2,000 square feet per gallon (single coat)
Directions for Use:
- Completely clean (with Congoleum Bright 'n Easy Cleaner) and dry the floor.
- Apply Congoleum Bright 'n Easy Satin-Gloss Floor Polish in a thin coat using a clean, damp sponge mop or an Applicator Pad. Apply polish evenly in one direction and allow to dry 30 - 40 minutes between coats. Additional coats should be applied in the opposite direction from the previous coat applied. Two coats of polish are recommended.
For enhanced performance, sweep floor daily to remove loose dirt and clean as needed with Congoleum Bright 'n Easy No-Rinse Cleaner.
Periodically, it may be necessary to remove polish to prevent build-up. Use Congoleum Bright 'n Easy Polish Remover.
© 2017 Congoleum Corporation All Rights Reserved.