Taski Vision Star MSDS

TASKI Vision Star floor finish is a unigue high solid floor finish that provides the highest level of gloss and durability. TASKI Vision Star finish may be used on a variety of resilient and non-resilient floorings like: PVC, vinyl, VCT, rubber, linoleum and stone flooring.

Directions for Use:

1. Blockade areas to be stripped or finished. Floors will be very slippery until dry.

2. Strip floor, using TASKI ICE-IT stripper, per the instructions on the stipper label.

Coating:

1. Apply 2-3 coats using a clean mop. Apply additional coats until desired gloss is obtained.

2. Allow 30-45 minutes drying time between coats. Allow finish to cure 24 hours before burnishing.

Burnishing:

1. Dust, mop or sweep.

2. Clean the floor with a mop or automatic scrubber using the recommended TASKI brand cleaner according the label directions.

3. Burnish using the appropriate pads.

For best results, do not dilute. Do not use on surfaces coler than 10C/50F. To avoid contamination, do not return unused finish to original container.

Coverage - 1,500 - 2,000 square feet per gallon