| || |
This product is no longer available
Pro Strip™ SC High Efficiency Floor Finish Remover, 32oz
Highly concentrated finish remover effectively removes even tough layers of floor finish. Low odor. Does not contain ammonia or butyl. Low foam. For use on most resilient flooring surfaces. Suitable to use in facilities, such as schools and hospitals, where odor is a concern. Concentrated formula is not regulated as hazardous waste for disposal under EPA Resource Conservation and Recovery Act (RCRA)
For Use On: Resilient flooring including vinyl, vinyl composition, vinyl asbestos. Concrete, marble, stone, terrazzo.
Directions For Use: Always read full product information, label and MSDS prior to use and follow recommended saftey precautions.
Dilute or dispense using cold water. Apply liberal amounts of solution uniformly to floor with mop. Start at edges to provide more soak time. Let solution soak for 10-15 minutes. Use mop to agitate and re-wet as necessary. Hand or machine scrub thoroughly using black pads or stripping brush. Pick up solution with a mop, wet-vac or autoscrubber. Thoroughly rinse floor with clean water. Let floor dry completely before applying finish or sealer as applicable to flooring material.
Safety Data: Diversey Pro Strip SC High Efficiency Floor Stripper MSDS
Spec Sheet: Diversey Pro Strip SC High Efficiency Floor Stripper Product Data
Specifically recommended for use on the following floor brands:
(Check compatibility with specific flooring material prior to use.):
Johnsonite (Tarkett Commercial Flooring)
Manufacturer Part Number: 5547275
Frequently Purchased With:
Copyright 2000-2014 1877FloorGuy.com All rights reserved.
Diversey Pro Strip SC High Efficiency Floor Finish Remover, 32oz