MIRACLE Grout Shield, 24 oz (New & Improved)
Product Description
Use Grout Shield additive in a 24-ounce size for smaller projects that need the most protection agains stains along with superior water resistance. Miracle Sealants makes this professional grade additive for sanded or non-sanded cement grout for extra durability for in home or commercial use.
Ultimate Strength and Stain Protection of Miracle Sealants Grout Shield Additive can be used for interior and exterior applications. This specialty sealer additive is used in place of water when mixing sanded and non-sanded cement grout. Miracle Grout Shield will provide superior stain and water resistance. Miracle grout shield will also improve compressive, tensile, and flexural strengths.
For Use With: Sanded and non-sanded cement grout, latex or polymer modified. Do not use with cement grouts that already claim stain resistance, or with liquid, ready to use, urethane or epoxy grouts.
Directions:
Safety Data Sheet for Miracle Sealants New & Improved Grout Shield, 24-ounce SDS
Ultimate Strength and Stain Protection of Miracle Sealants Grout Shield Additive can be used for interior and exterior applications. This specialty sealer additive is used in place of water when mixing sanded and non-sanded cement grout. Miracle Grout Shield will provide superior stain and water resistance. Miracle grout shield will also improve compressive, tensile, and flexural strengths.
For Use With: Sanded and non-sanded cement grout, latex or polymer modified. Do not use with cement grouts that already claim stain resistance, or with liquid, ready to use, urethane or epoxy grouts.
Directions:
- Shake well before using.
- Pour 3 quarters of the correct amount of Miracle Grout Shield into a clean mixing bucket. Slowly add the entire bag of grout and thoroughly mix by hand or with a slow speed drill mixer used at the lowest RPM setting (Do not exceed 200rpm).
- Mix until all grout has been uniformily wetted into a paste and no dry grout remains in the mixture. DO NOT OVER MIX. Let sit in mixing bucket for 10 minutes and then mix again mixing in the remainder of the Grout Shield.
- Follow the grout manufacturer's installation and coverage instructions.
- In order to maintain color consistency across an entire installation, use the same liquid to grout proportions when using multiple containers for the same job.
- Inspect and rework grout joints if necessary during final cleaning. (between 45-60 minutes).
- 7 lb bag of sanded grout : 24 oz Grout Shield
- 10 lb bag of sanded grout : 24 oz Grout Shield (+ 4 to 6 oz water or Grout Shield)
- 10 lb bag of Non-Sanded grout : 48 oz ( 2 - 24 oz containers of Grout Shield)
- 25 lb bag of Sanded grout : 70 oz Grout Shield
Safety Data Sheet for Miracle Sealants New & Improved Grout Shield, 24-ounce SDS
