Hillyard Renovator Low-Foaming Cleaner, 1 Gallon

Item Number: HIL-12006
1 - 3 pieces$46.75 ea.
4 + pieces$42.08 ea.
Regular price:$46.75
Quantity:



Hillyard RENOVATOR® Low-Foaming Non-Butyl Cleaner, 1 Gallon Fast Acting Cleaner for Removal of Industrial Oil, Grease and Wax Buildup

Authorized for use by the NSF in Category A1.

Multipurpose, concentrated, heavy-duty cleaner/degreaser for industrial, commercial, and institutional facilities that need extra cleaning power for tough grease, dirt and wax buildups.

Non-butyl, water-based formula contains no solvents and no phosphates. Can be used on many washable surfaces including hard floors, walls, industrial equipment and machinery. DO NOT USE ON GLASS.

For Use On: Hard-Surface floors including Concrete, Ceramic Tile, Quarry Tile, Clay Tile and Paver Brick; Walls, Industrial Equipment, Machinery, Tanks, Small parts, Conveyors and more. Do not use on glass.

Directions for Use:
Test in a small area and read full product label prior to full use to ensure surface compatibility.
Removing grease, grime, oil, dirt, soot and stains from washable surfaces: Dilute 1:8 with hot water (16 oz per gallon of water). Apply by mopping, spraying, or wiping. Scrub with floor machine, sponge, brush or cloth; pick up solution. Rinse with clean, hot water; allow to dry.
Removing wax buildup from hard surface flooring: Use 1:8 with water (16 oz per gallon of water). Mop on and let solution stand for 5 minutes. Scrub with floor machine equipped with stripping pad or abrasive scrub brush. Pick up solution. Flood rinse floor with clean water then damp mop rinse twice with clean water. Allow to dry. Repeat if all polish is not removed. Work 10” x 10” areas. Do not allow solution to dry on floor.
GENERAL CLEANING WITH AUTOMATIC SCRUBBER: Use 1:128 with water (1 oz per gallon). Use light scrub pad or scrub brush on machine. Remove soiled cleaning solution.
DAILY DAMP MOPPING: Use 1:128 with water (1 oz per gallon of water).
CLEANING LATEX WALL PAINTS: Use 1:128 with water (1 oz per gallon of water). Test cleaning solution in inconspicuous area for effect on paint. DO NOT PROCEED if adverse effects occur. Cleaner vapors or liquid may cause discoloration on uncured, light colored painted surfaces.

NOTES:
  • Some types of asphalt tile and linoleum may be discolored by Renovator. To correct, scrub with a solution of SUPER SHINE-ALL and cold water (3oz per gallon of water). Repeat if necessary. Rinse thoroughly before recoating with floor polish.
  • Floors become slippery during and after finish removal and before floor is refinished.
  • When using this product in federally inspected meat and poultry plants, follow all usage instructions with thorough potable water rinse.
  • Do not use on glass.

  • Safety Data: Hillyard Renovator MSDS

    Specifically recommended for use on the following floor brands:
    (Check compatibility with specific flooring material prior to use.):
    Johnsonite (Tarkett Commercial Flooring)

    Additional Information: Renovator Product Data Sheet