Buckeye® Liquid Shovel® Floor Stripper, 1 Gallon
Buckeye Liquid Shovel Floor Finish Remover, 1 Gallon
Mild pH cold water floor stripper designed for pH sensitive flooring such as rubber, linoleum and Marmoleum® to remove old layers of floor finish or to prep a newly installed floor. Butyl-free formula liquefies the toughest crosslink floor finishes releasing no noxious vapors and reducing clogging of pads. Contains Liquescent® technology. Low-foaming for easy wet-vacuum pickup.
For Use On: sensitive floors such as rubber, linoleum and Marmoleum.
Directions For Use:
Always read full product information including product label and MSDS and test in a small, inconspicuous area prior to full use.
Routine Stripping: Use 32 fl. oz/gallon cold water (250 mL/L), (1:4). Wet floor thoroughly with diluted solution. Allow to stand 20 minutes on floor. DO NOT allow solution to dry on floor. Machine scrub with a black or brown stripping pad. Pick up solution using a mop or wet vacuum. Rinse floor at least twice with cold water. After floor is thoroughly dry, apply floor coating.
Note: Floor will be slippery after finish is removed. Use appropriate caution signage and do not allow traffic on floor until a finish is applied and dry.
Safety Data: Buckeye® Liquid Shovel® MSDS
Additional Information: Buckeye® Liquid Shovel® Product Data Sheet
Specifically recommended for use on the following floor brands:
(Check compatibility with specific flooring material prior to use.):
Johnsonite (Tarkett Commercial Flooring)