| || |
Hilway Direct Floor Finish GLOSS/HIGH-GLOSS, 1.33 Gal
Hilway Direct Floor Finish GLOSS/HIGH-GLOSS, 1.33 Gallons
Classic high shine Acrylic floor finish. Hard-wearing, durable protection. Highly scratch & scuff resistant. No VOCs. Non-Hazardous. High-shine.For Use On:
Sheet Vinyl, LVT, VCT, Rubber, Linoleum, Cork, Asphalt Tile, Marble, Slate, Concrete, Quarry Tile, or Terrazzo flooring.Directions For Use:
When applying the product avoid strong sunlight and drafts.
Turn off under floor heat before commencing work.
Ensure sufficient ventilation.
Read complete product label and manufacturer instructions prior to application.
Coverage: Single Coat:
- Clean floor thoroughly prior to application of finish.
- Shake finish well before use.
- Apply length-ways a thin, even, undiluted coat using a wide mop or applicator.
- When sufficiently hard to walk on, approximately one (1) hour, repeat the procedure crosswise.
- Allow finish to dry for at least eight (8) hours after the second coat and before use.
1000 square feet per 1.33 gallon container
Proper application requires two (2) coats.
Coverage may vary depending on porosity of flooring material.Recommended Cleaning & Maintenance:
Dust mop or sweep then clean with a mop or automatic scrubber using Hilway Direct Neutral Cleaner.Safety Data: Hilway Direct Gloss Floor Finish MSDS
Manufacturer Part Number: HD-G133G
Brand: Hilway Direct
Frequently Purchased With:
1877floorguy.com is committed to providing quality products and timely service to our customers.
With our depth of floor care knowledge you can feel confident asking questions about the products we sell including when and how to use them, what you need to keep your floor clean or polished and how much of it you’ll need.
Telephone calls and emails are answered by employees who are well educated in flooring maintenance or by the owners themselves.
Give us your feedback! We like hearing from customers so we know what we’re doing right and what we can do better.