Purchase 4 or more bottles of Hartco Spray Tone and get 10% off.

Hartco Spray Tone reconditions and restores the beauty of Hartco Hardwood flooring.

NOTE: Use only on Hartco Acrylic impregnated wood floors without the Permion finish.

Directions:

For touch up in small areas: Apply Hartco Spray Tone to a clean cloth and then wipe on the scratch, spot or small area in question until the color blends.

For reconditioning large areas or entire floor:

1. Once the area is cleaned and ready for reconditioning, shake Hartco Spray tone Bottle well.

2. Spay a small amount of Hartco Spray Tone on a 3'x3' section.

3. Immediately buff with a slow speed (less than 1000 RPM) Buffer and a medium coarse nylon pad (equivalent to 3M's red pad).

4. Apply and buff only enough Hartco Spray Tone on the wood floor to achieve an even coat.

Important: Wait at least 24 hours, or until Hartco Spray Tone is throughly dry before application of Hartco Spray Shield or Hartco Pattern Plus shine.

Coverage: 16 oz. covers approximately 875 Sq. ft.