Dr. Schutz Waxnomor Stripper – 5 Liter
Special, low pH formula, stripping agent for cleaning and stripping newly installed or heavily soiled vinyl, linoleum and rubber floors. Removes the remains of old care products and adhesive residue.

For Use On: Vinyl, Linoleum and Rubber flooring.

Directions For Use:
Cleaning after installation:

1. Remove coarse dirt with a sweeping brush or vacuum cleaner.
2. Dilute Dr. Schutz Stripper with water in a ratio of between 1:5 and 1:10. In case of particularly stubborn residue use undiluted if required. For low levels of dirt adjust the strength of the solution as appropriate.
3. Apply the cleaning solution to the floor area, distribute and allow to stand for approx. 10 minutes.
4. Clean the floor surface using an automated scrubber, or scrubbing brush.
5. Take up the loosened dirt a mop or shop vac.
6. Mop the floor with clear water until completely clean.

Stripping:

1. Remove coarse dirt with a sweeping brush or vacuum cleaner.
2. For domestic use, dilute Dr. Schutz Stripper in a ratio of 1:5 with water. For commercial use, use in concentrated form or dilute in a ratio of up to 1:3 (depending on the resistance of the protective film), spraying the floor with clear water before use if necessary.
3. Apply the cleaning solution to the floor area, distribute and allow to stand for 15-20 minutes.
4. Clean the floor surface using an automated scrubber, or scrubbing brush.
5. Take up the loosened dirt a mop or shop vac.
6. Mop the floor with clear water until completely clean.

Notes:

Do not allow Dr. Schutz Stripper to dry out on the floor. For this reason, work in sections.

Before stripping entire floor, check for color and material fastness in an inconspicuous spot. If necessary, dilute Dr. Schutz Stripper even more and apply several times using a shorter standing time.

Stripped floor will be slippery. Take appropriate precautions.

Wear rubber gloves during use and ensure that the rooms to be treated are well ventilated.

Do not spray sensitive surfaces (e.g., wood, metal, varnished surfaces) with the cleaning solution.

Coverage:

Cleaning After Installation: 600-1000 square feet per 5L container

Residential Stripper: 1600-2500 square feet per 5L container

Commercial Stripper (undiluted): 300-500 square feet per 5L container

Safety Data Sheet: