Armstrong Restore Hardwood Floor Finish should be used only on urethane finish hardwood floors. It is NOT intended for use on hardwood floor that have been waxed with paste wax or acrylic waxes or maintained with oils or oil based products.

1. Vacuum and dust mop thoroughly. Remove all gum, etc. from the floor. 2. Clean the floor thoroughly using Armstrong Hardwood & laminate cleaner following label instructions.

Application Instructions: To obtain a consistent appearance, the entire floor should be coated. 1. Rock container several times to thoroughly re-mix contents before opening. 2. Pour Armstrong Restore Hardwood Floor Finish into a clean flat pan, such as a paint roller tray. 3. Apply with a new, clean sponge mop or paint pad. The applicator, even if new, should be thoroughly rinsed before use as contamination may affect results. 4. Dip the applicator into the flat pan and gently remove excess liquid to minimize applying too much product onto the floor. Spread a thin layer of Armstrong Restore Hardwood Floor Finish with the applicator in the direction of the wood grain. We recommend applying the Armstrong Restore Hardwoood Floor Finish in small areas, 3-4 floor boards wide, moving down the length of the floor. Repeat this pattern until the entire floor has been coated. 5. Avoid applying heavy coats of Armstrong Restore Hardwood Floor Finish. Instead, apply two thin coats if necessary. Be sure to allow proper dry time between coats. 6. Destroy all excess materials; do not return to container or retain product for future use. Allow to dry for one hour (longer in humid areas) before applying additional coats. Light traffic is permitted within 2-3 hours. Wait 24 hours before heavy traffic and furniture replacement.

Armstrong Restore Hardwood Floor Finish covers approximately 500 square feet.

Purchase 4 or more Armstrong Restore Hardwood Floor Finish and receive 10% off regular price.