Hilway Direct Floor Finish MATTE, 1L (33.8oz)
This item is eligible for free shipping via USPS. And also ships free when added with other items.
Hilway Direct Floor Finish MATTE, 1 Liter
Reliable, true and natural MATTE floor finish. High 32% solids. Hard-wearing, durable Acrylic Finish. Scratch & Scuff Resistant. No VOCs. Non-Hazardous. Hard to find another matte finish as natural looking as this one!
For Use On: Sheet Vinyl, LVT, VCT, Rubber, Linoleum, Cork, Asphalt Tile, Marble, Slate, Concrete, Quarry Tile, or Terrazzo.
Directions For Use:
- Sweep or vacuum then clean floor thoroughly or remove existing floor finish coating as applicable. Rinse and neutralize floor with clean water.
- Shake Hilway Direct finish well before use.
- Apply length-ways a thin, even, undiluted coat using a wide mop or applicator.
- When sufficiently hard to walk on, approximately one (1) hour, repeat the procedure crosswise.
- Apply up to 3 coats total.
- Allow finish to dry for at least eight (8) hours after the final coat and before use. Finish should be completely dry before allowing traffic on floor.
Coverage: Single Coat: 350 square feet per liter. Proper application requires two (2) coats. Coverage may vary depending on porosity of flooring material.
Recommended Cleaning & Maintenance:
Dust mop or sweep then clean with a mop or automatic scrubber using Hilway Direct Neutral Cleaner.
Safety Data: Hilway Direct Matte Floor Finish MSDS