Hilway Direct Floor Finish MATTE, 1L (33.8oz)
This item is eligible for free shipping via USPS. And also ships free when added with other items.
Hilway Direct Floor Finish MATTE, 1 Liter
If you want a matte floor finish that reduces scratches and scuff marks, Hilway Direct Floor Finish in Matte is a great solution. It's designed for use on your sheet vinyl, LVT, VCT, rubber, linoleum, cork, asphalt tile, marble, slate, concrete, quarry tile or terrazzo flooring and leaves behind a reliable and natural matte finish. Using a high solids acrylic finish formula, this product provides a durable, highly scuff-resistant and protective coating. Hilway Direct Floor Finish contains no VOCs and is non-hazardous, so you can apply it safely in busy residential and commercial environments. 1877FloorGuy is a trusted distributor of Hilway Direct products, and we ship this 1-liter Hilway Direct finish for free. Coverage for Single Coat: 350 square feet per liter. Proper application requires two (2) coats. Coverage may vary depending on porosity of flooring material.
- High solids (32 percent) formula
- Highlights the natural look of wood or stone flooring
- Low-gloss finish minimizes the appearance of scratches
- Safety Data: Hilway Direct Matte Floor Finish MSDS
Directions For Use:
- Sweep or vacuum then clean floor thoroughly or remove existing floor finish coating as applicable. Rinse and neutralize floor with clean water.
- Shake Hilway Direct finish well before use.
- Apply length-ways a thin, even, undiluted coat using a wide mop or applicator.
- When sufficiently hard to walk on, approximately one (1) hour, repeat the procedure crosswise.
- Apply up to 3 coats total.
- Allow finish to dry for at least eight (8) hours after the final coat and before use. Finish should be completely dry before allowing traffic on floor.
Coverage: Single Coat: 350 square feet per liter. Proper application requires two (2) coats. Coverage may vary depending on porosity of flooring material.
Recommended Cleaning & Maintenance:
Dust mop or sweep then clean with a mop or automatic scrubber using Hilway Direct Neutral Cleaner.
Safety Data: Hilway Direct Matte Floor Finish MSDS