Hilway Direct Floor Finish HIGH-GLOSS, 1L (33.8oz)

Item Number: HD-G1L
1 - 5 pieces$23.80 ea.
6 + pieces$21.42 ea.
Regular price:$23.80
Quantity:



Hilway Direct Floor Finish GLOSS/HIGH-GLOSS, 1 Liter

Classic high shine Acrylic floor finish. Hard-wearing, durable protection. Highly scratch & scuff resistant. No VOCs. Non-Hazardous. High-shine.

For Use On: Sheet Vinyl, LVT, VCT, Rubber, Linoleum, Cork, Asphalt Tile, Marble, Slate, Concrete, Quarry Tile, or Terrazzo flooring.

Directions For Use:
  1. Clean floor thoroughly prior to application of finish.
  2. Shake finish well before use.
  3. Apply length-ways a thin, even, undiluted coat using a wide mop or applicator.
  4. When sufficiently hard to walk on, approximately one (1) hour, repeat the procedure crosswise.
  5. Allow finish to dry for at least eight (8) hours after the second coat and before use.
Notes:
  • When applying the product avoid strong sunlight and drafts.
  • Turn off under floor heat before commencing work.
  • Ensure sufficient ventilation.
  • Read complete product label and manufacturer instructions prior to application.

  • Coverage: Single Coat: 350 square feet per liter.
    Proper application requires two (2) coats.
    Coverage may vary depending on porosity of flooring material.


    Recommended Cleaning & Maintenance:
    Dust mop or sweep then clean with a mop or automatic scrubber using Hilway Direct Neutral Cleaner.

    Safety Data: Hilway Direct Gloss Floor Finish MSDS