Hilway Direct Floor Finish GLOSS/HIGH-GLOSS, 1.33 Gal
Hilway Direct Floor Finish GLOSS/HIGH-GLOSS, 1.33 Gallons
Classic high shine Acrylic floor finish. Hard-wearing, durable protection. Highly scratch & scuff resistant. No VOCs. Non-Hazardous. High-shine.
For Use On: Sheet Vinyl, LVT, VCT, Rubber, Linoleum, Cork, Asphalt Tile, Marble, Slate, Concrete, Quarry Tile, or Terrazzo flooring.
Directions For Use:
- Clean floor thoroughly prior to application of finish.
- Shake finish well before use.
- Apply length-ways a thin, even, undiluted coat using a wide mop or applicator.
- When sufficiently hard to walk on, approximately one (1) hour, repeat the procedure crosswise.
- Allow finish to dry for at least eight (8) hours after the second coat and before use.
Coverage: Single Coat: 1000 square feet per 1.33 gallon container
Proper application requires two (2) coats.
Coverage may vary depending on porosity of flooring material.
Recommended Cleaning & Maintenance:
Dust mop or sweep then clean with a mop or automatic scrubber using Hilway Direct Neutral Cleaner.
Safety Data: Hilway Direct Gloss Floor Finish MSDS